ATC SCM110ASL Dual 9" Pro 3-way Powered Studio Monitors

ATC SCM110ASL Pro Dual 9" Powered 3-way Studio Monitor - Pair

Active 3-way Studio Monitor with 350W Tri-amplification; 1" HF, 3" MF, and 2 x 9" LF Drivers (pair)

The Professional Choice for No-compromise Audio

This model is used by KOG Mastering in Auckland NZ. Mastering hundreds of NZ hits for over 5yrs!

While acknowledging the inherent value of compact, nearfield "real-world" studio monitors, there's no substitute for unflinchingly accurate main monitors that tell you everything you need to know about what you're recording; reproducing high-resolution, full-bandwidth audio with absolute clarity and uncompromised dynamic range. Designed for medium-to-large control rooms and film re-recording stages, the ATC SCM110ASL Pro active studio monitors represent a significant monitoring upgrade for your studio. ATC monitors are handmade in the U.K. using cutting-edge components and processes, and you'll immediately hear why they're considered among the finest reference monitors in the world. You'll find ATC monitors in the studios of many world-renowned engineers. For a main monitoring experience that sets a new standard for sonic accuracy and mixing precision, choose the ATC SMC20ASL Pro.

Engineering the best speaker possible

Heavy science and engineering back up every ATC product. These monitors aren't just cobbled together from parts that will work together. The SCM110ASL Pro was thoroughly engineered to deliver high-performance reproduction of any audio you feed it, allowing you to hear every detail in your recordings. Each SCM110ASL incorporates proprietary ATC drivers — a 1" dual-suspension S-Spec tweeter, 3" Super Dome midrange, and dual SL Spec 9" bass drivers — tri-amplified with a custom ATC 350W Tri-amp pack. 

Proprietary drivers and amplifiers

Great-sounding monitors start with great-sounding drivers. The SCM110ASL Pro drivers are manufactured to exacting standards at ATC's in-house facility. Hand-wound voice coils are made from flat oxygen-free copper wire and operate in a precision long magnetic gap. Specially designed magnet vents not only reduce airflow noise and heat, but increase power handling and reliability. These drivers are designed to give you a smooth and even frequency response without built-in EQ. Powered by ATC's proprietary 350W Tri-amp pack, the SCM110ASL Pro monitor is designed to perform at the top of its class.

ATC SCM110ASL Pro Dual 9" Powered 3-way Studio Monitor (Pair) Features:

• ATC 1" dual-suspension S-Spec tweeter
• ATC 3" Super Dome midrange driver
• Twin SL Spec 9" bass drivers
• Onboard ATC grounded-source 350W Tri-amp pack
• LF contour control
• Clip indication
• Amplitude linearity (±2dB): 50Hz–17kHz
• Cut-off frequencies (-6dB, free-standing): 30Hz, 22kHz
• Horizontal dispersion: ±80°, coherent
• Vertical dispersion: ±10°, coherent
• Maximum continuous SPL (1 meter): 115dB
• Crossover frequencies: 380Hz, 3.5kHz
• Input connectors: Male XLR
• Input sensitivity: 1V
• Input sensitivity trim: 0dB to -6dB (continuously variable via rear-panel trim)
• Input impedance: balanced > 10kΩ
• Amplifier output: LF 200W, MF 100W, HF 50W
• Filters: even-order, critically damped
• Overload protection: active FET momentary gain reduction plus thermal tweeter protection
• Front-panel indicators: Power On, Gain Reduction alert
• LF EQ: 0dB to +6dB @ 40Hz (continuously variable via rear-panel trim)
• Dimensions (HxWxD): 28.2" x 24.5" x 16.5" (depth with amplifier at rear adds 3")
• Weight: 160.6 pounds
• Includes ATC's 6-year limited warranty

We have SCM20s, SCM25As and SCM150s in our Wellington showroom/studio, please contact us at sales@stlaudio.co.nz  with any inquiries or to book a demo.